KingKong \ KingKong2 Controller NS08 NS09 V3.1 Firmware
GuliKit KingKong\KingKong2 Controller NS08 NS09 V3.1 Firmware
1. ZL ZR accuracy is optimized.
2. Fixe the issue that occasionally it takes too long time for joystick calibration.
3. Fixe the issue that occasionally the joystick can not reach the ring edge after calibration.
1.Turn off the controller,use the USB A to USB C cable to connect the controller and your computer.
2.Hold the APG button and then press A button,a U disk with name of GuliKit will show up in seconds.
3.Download the firmware package and unzip it, copy the corresponding" xxx.bin " file to the U disk, upgrading will be finished automatically in seconds, the controller will have auto power off and U disk will disappear after upgrading completion.
Note: The controller will auto power off once updating is completed. Don't unplug the USB cable during updating process.
In case you need to stop updating work,double click the Mode button to turn off the controller to quit updating mode.
After updating completion, it is needed to make quick calibration on controller sticks by pressing L, R buttons, Left of D-pad and A buttons together with a vibration indication.