GuliKit KingKong Controller NS08 NS09 V2.1 Firmware
GuliKit NS08 NS09 Firmware V2.1
1. Rewrite the joystick algorithm,Improve the performance of stick with no deadzones.
2. Add the function of auto calibration on stick. When the controller is power on, just press the four buttons of L,R,left of D-pad and A at the same time, the controller will have auto calibration on sticks with a long vibration.
1.Turn off the controller,use the USB A to USB C cable to connect the controller and your computer.
2.Hold the APG button and then press A button,a U disk with name of GuliKit will show up in seconds.
3.Download the firmware package and unzip it, copy the corresponding" xxx.bin " file to the U disk, upgrading will be finished automatically in seconds, the controller will have auto power off and U disk will disappear after upgrading completion.
Note: The controller will auto power off once updating is completed. Don't unplug the USB cable during updating process.
In case you need to stop updating work,double click the Mode button to turn off the controller to quit updating mode.
After updating completion, it is needed to make quick calibration on controller sticks by pressing L, R buttons, Left of D-pad and A buttons together with a vibration indication.